Linyi, Shandong, China
Response Time: < 24h
Response Rate: 0%
| Model No.: LZB2B-CNC-500... | Place of Origin: China |
The product description
Functional Features:
The software can be used to optimize the layout of profiles and drive the equipment directly to improve the profile utilization ratio and save material cost to the greatest extent for users.
Can print label, not only can mark the profile in a timely manner, but also can provide a perfect solution for the following process.
This machine is the domestic high-end aluminum profile double - end cutting saw equipment.
The whole machine adopts European model, the appearance is neat, the air is generous.
The control system adopts the unprecedented closed-loop design of domestic saws to ensure the repeated sizing accuracy to a greater extent.
Imported motor directly connected saw blade, the cutting action adopts the swing form of lever.
The feed of saw blade is driven by gas-liquid damping cylinder, and the cutting is stable.
High precision imported cutting blade, smooth cutting section.
The imported servo motor drives the reducer to realize any adjustment of the saw Angle between 45° and 157.5°.
Several profile sizes to be cut can be input at one time to achieve continuous cutting of different lengths, realize direct input of machining dimensions, and do not need to go back to the reference point to change the cutting length.
The movable saw head is driven by the imported servo motor to drive the reducer. It has a fast moving speed and can move 25 meters per minute. It is fully closed-loop control with high measuring accuracy.
There is a saw blade sealing device under the working table, which has good chip removal effect.
With a follow-up open and close saw hood, safe and reliable, good working environment.
Movable section material support frame, compact structure, small machine footprint.
The profiles are clamped with two cylinders for each head, making the cutting safe and reliable.
Technical parameters
Model: x5000 LZB2B - CNC - 500
Input voltage: 380V/50HZ
Total power: 2× 3.0kW
Working pressure: 0.5-0.8mpa
Gas consumption: 60L/min
Speed: 2800 r/min
Cutting Angle: 45° ~ 157.5°
Saw cutting width × height: 135×230mm
Cutting length: 90° : 360 ~ 5000mm;45° : 760 ~ 5000mm
Dimensions: 5900×1300×1400mm
